CVT Clutches – Get Yours Before They’re Gone!

Searching for a CVT Clutch for your go kart, mini bike or wakeboard winch?

Well … you want ‘em and we’ve got ‘em!

With Comet out of the market these things are nearly impossible to find. We have become the largest manufacturer and we’ve slashed the prices on CVT clutches!

You can see our pricing and purchase one here now:

3/4″ Torque Converter – CVT Clutch – Wakeboard Winch – Go Kart Clutch – mini bike – mini chopper

Replaces Comet 218353A, 219552A, 219456A, 203814A, and 217610A TAV2 30-75 Torq-A-Verters. It is also is a replacement for Yerf Dog Driver Unit Q43201W, Manco, Carter Brothers, Cushman Scooters, and more

Bullet Lines go kart clutch is an asymetrical inline small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter. This clutch will help you get more power of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds at of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.

Our torque converter fits a 3/4″ shaft and comes with a 10 tooth sprocket for a 40/41 chain. It will work with small engines producing 5.5 HP – 9 HP

Engine compatibility: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.

  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • Lifan

Specifications:

  • Driven unit: Dia.ö157mm
  • Drive clutch bore: ö19 (3/4″)
  • Belt: Asymmetrical type
  • Top width: 19mm(3/4″)
  • Sprocket teeth: 10 teeth
  • Engagement range: 2350±200 RPM
  • Recommended engine: 5.5HP – 9HP engine, 3/4″shaft with flat keyThe Torque Converter assembly includes:
  • Driver Unit:1set
  • Driven Unit:1set
  • V-Belt:1pc
  • Driven Shaft & Gear:1set
  • Side Retainer Plate:1pc
  • Torque Converter Cover:1pc
  • Instructions

Bullet Lines 1″ Torque Converter – Small Engine Go Kart Clutch – Replaces Comet TAV2 30-100

Bullet Lines 1″ torque converter replaces Comet TAV2 30 – 100 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more

Bullet Lines 1″ go kart clutch is an asymetrical inline small engine clutch that replaces Comet TAV2 30 – 100 Torq A Verters. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdrive. A torque converter acts similar to a transmission, allowing higher speeds of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.

This torque converter fits a 1″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 8 HP – 13 HP

Model 1: 1″ Bore, 35 Chain, 12 Tooth
Model 2: 1″ Bore, 40/41 Chain, 10 Tooth

Engine compatibility: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.

  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • Lifan
    Specifications:
  • Driven unit: Dia. 157mm
  • Drive clutch bore: 1″
  • Belt: Asymmetrical type
  • Top width: 19mm(3/4″)
  • Sprocket teeth: Choice of 10 teeth or 12 teeth
  • Engagement range: 2350±200 RPM
  • Recommended engine: 8HP – 13HP engine, 1″shaft with flat keyThe Torque Converter assembly includes:
  • Driver Unit:1set
  • Driven Unit:1set
  • V-Belt:1pc
  • Driven Shaft & Gear:1set
  • Side Retainer Plate:1pc
  • Torque Converter Cover:1pc
  • Instructions

All respective trademarks and registered trademarks appearing on this website belong to their respective owners

 

Bullet Lines 1″ 40 SeriesTorque Converter Driver – 8 – 18 hp engines- Replaces Comet 40 series

Bullet Lines 1″ torque converter driver replaces Comet 40 Series Torq-A-Verter models 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more

Bullet Lines 1″ 40 series torque converter driver is a symmetrical inline small engine clutch that replaces Comet 40/44 Series Torq-A-Verter models 203015A, 203015, and works with 8 – 18 hp engines within the 1600 – 3300 RPM range. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission providing higher speeds, and smoother acceleration. The 40/44 series is heavily used in three wheelers, ATV’s, LTV’s, go karts, and other transportation vehicles. Commercial uses include oil well pumps, tractors, tillers, lawnmowers, construction, and industrial equipment.

This torque converter fits 8 – 18 hp engines with a 1″ shaft,1/4″ keyway, and tapped end.

Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.

 

  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • LifanSpecifications:

     

  • Drive clutch bore: 1″
  • Belt: Symmetrical type
  • Engagement range: 1600 – 3300 RPM
  • Recommended engine: 8HP – 18HP engine, 1″shaft with 1/4″ flat key wayThe Torque Converter assembly includes:

     

  • Driver Unit:1setAll respective trademarks and registered trademarks appearing on this website belong to their respective owners

 

 

 

 

GTC Torque Converters do not include covers

GTC Manufacturing TC2 small engine torque converter replaces Comet 218352A, 218353A TAV2 30-75 Torq-A-Verter. This clutch comes complete with drive and driven clutches, belt, engine mounting plate with a built in jackshaft and sprocket, all hardware, and installation instructions.

Available Models: Choose which model you need during checkout


  • TC2 1001: 3/4″ Bore, #35 Chain, 12 Tooth Sprocket, 2-7hp Engines: Replaces Comet 218352A TAV2 30-75 Torq-A-Verter
  • TC2 1002: 3/4″ Bore, #40/41 Chain, 10 Tooth Sprocket, 2-7hp Engines: Replaces Comet 218353A TAV2 30-75 Torq-A-VerterEngine compatability: TC2 is compatible on most engine with horizontal shaft.
  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • Lifan

GTC Manufacturing TC2 small engine torque converter replaces Comet 218354A, 218355A TAV2 30-100 Torq-A-Verter. This clutch comes complete with drive and driven clutches, belt, engine mounting plate with a built in jackshaft and sprocket, all hardware, and installation instructions.

Available Models: Choose which model you need during checkout

  • TC2 1003: 1″ Bore, #35 Chain, 12 Tooth Sprocket, 8-13hp Engines: Replaces Comet 218354A TAV2 30-100 Torq-A-Verter
  • TC2 1004: 1″ Bore, #40/41 Chain, 10 Tooth Sprocket, 8-13hp Engines: Replaces Comet 218355A TAV2 30-100 Torq-A-VerterEngine compatability: TC2 is compatible on most engine with horizontal shaft.
  • Briggs
  • Robin
  • Tecumseh
  • Honda (and clones)
  • Kohler
  • Clinton
  • Lifan

Purchase Your CVT Clutch!

Replacement Comet Torque Converters | 30, 40, Clutches, CVT, Parts, GTC, Go Kart, Gokart, Cart, TAV2 30-75, TAV 2, TAV, Torq-A-Verter, Torq, Mini Bike, Mini Chopper, 1″, 3/4″, 5/8″, Bore, Small Engine, 218352A, 218353A, 218354A, 218355A, Belt, Motocycle

Comments on this entry are closed.